Home | Shop | Respiratory Protection, Respirator Filters & Cartridges, A. Respiratory Protection | 3M™ Mercury Vapor Cartridge/ P100 Mercury Particulate Filter 60929S (pair)

3M™ Mercury Vapor Cartridge/ P100 Mercury Particulate Filter 60929S (pair)

$50.00 – or subscribe and get up to 5% off

Quantity per package = 2. The 3M™ 60929s mercury vapor cartridge, P100 particulate filter combo is NIOSH approved and has been designed for use with 3M™ 6000, 6500, 7500 half mask series and the FF-400, 6000 and 7800 full face series of respirators. The 60929s protects against mercury vapor & particulates. The swept-back design allows an enhanced field of view and comfort. If you have not performed a Hazard Assessment to determine your filter change out schedule, 3M™ recommends replacing the 60929s mercury vapor cartridge, P100 particulate filter every 30 days.

Choose a REDUCED RATE subscription
None = Original price of $50

Product Description

3M™ 60929s mercury vapor cartridge, P100 particulate filter (pair)

Respirators are used as a safety device to protect workers from inhaling dangerous substances such as chemicals and infectious particles. Respirators are one of the most important pieces of protective equipment for working in hazardous environments and selecting an appropriate respirator requires an assessment of all the workplace operations, processes or environments that may create a respiratory hazard. By identifying the hazard and its airborne concentrations, workers can determine a proper respirator and correct cartridge and/or filter. This assessment should be done by experienced safety personnel or by an industrial hygienist.

Even with engineering controls, the removal/replacement of mercury dental fillings generates quantities of mercury particulate that exceeds both the California Permissible Exposure Limit (PEL) of 25 ug/m3 for mercury and the Ceiling for mercury (100 ug/m3), which is a never to exceed level.

The 3M™ mercury vapor / particulate cartridge / filter is designed for use with 3M™ 6000, 6500, 7500 half mask series and the FF-400, 6000 and 7800 full face series of respirators and is NIOSH approved for protection against mercury vapor and mercury particulates. The swept-back design allows an enhanced field of view and comfort and bayonet compatibility allows use with many 3M reusable half and full facepiece designs. Quantity per package = 2.

  • NIOSH approved for protection against mercury vapor, chlorine or sulfur dioxide and certain particulates
  • Swept-back design allows an enhanced field of view and comfort
  • Bayonet compatibility allows use with many 3M reusable half and full facepiece designs
  • Wide range of applications reduces inventory needs
  • Simple installation and usage requirements reduce training needs
  • Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

When properly fitted, helps provide respiratory protection from mercury vapor, chlorine or sulfur dioxide and certain particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).

Note: The mercury vapor end of service life indicator must be readily visible without manipulation when wearing the respirator. If not readily visible, do not use.

The mercury vapor end of service life indicator (ESLI) does NOT apply to the particulate load. Your Hazard Assessment will determine you cartridge / filter change out program. If you have not done a Hazard Assessment, 3M recommends replacing the filters 30 days from opening.

Legal Disclaimer
3M personal protective equipment is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety

Additional Information

Weight1 lbs
Dimensions10 × 6 × 3 in

Product Inquiry

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.